View: 10865|Reply: 83

Android 8.1 software update for Jelly Pro is available now!

  [Copy Link]
Posted at 2018-7-13 10:07:34 | All floors |Read mode
Dear All,

After continuous effort for past several months, we are glad to announce the Android 8.1 software update for Jelly Pro is available now!

You can upgrade your Jelly Pro by “Settings->About phone->Wireless Update”

Please find the detail update information below:

Version: Unihertz_Jelly-Pro_20180712/Unihertz_Jelly-Pro_N_20180712

[Add]:

1. Add Flip to mute(Settings->Smart Assistant->Flip to mute);

2. Add Face ID(Settings->Security & location->Face ID);

3. Add Google Keep app;

[Remove]:

1. Remove Settings->Background task clear;

2. Remove Settings->Battery saving mode;

3. Remove Settings->Network access control;

4. Remove Settings->Buttons;

5. Remove Backup and restore/Email/Browser/Gallery apps;

[Notice]:

Due to big difference in data structure/storage location between Android N and Android O, some settings may be changed during the update.

Including but not limited to:

1. Home screen wallpaper may be restored to default wallpaper;

2. WiFi APs may be forgotten, need to connect it again with password;

3. Paired Bluetooth devices may be forgotten, need to pair it again;

4. WiFi hotspot may be closed if opened before FOTA;

5. DuraSpeed may be switched off;

6. Brightness level(Settings->Brightness level) and Sleep time(Settings->Display->Sleep) may be restored to default value;

[Important]:

To avoid any data lost, strongly suggest to backup your personal data/settings before firmware update!!!!

To reduce the pressure on the FOTA server, the new update will be released in batches. If you do not receive it, please just wait for several days. Thanks for your understanding.


You can experience all the new features of Android Oreo now, hope you like it!

Thanks for your support and we will keep updating Jelly/Jelly Pro as we always did.

You can follow us in Facebook/Twitter to get early notice when the new update is available. Also you can pay attention to our website forum where we will release the notice at first time.

For the Jelly(1GB+8GB) version, sorry we can not update it to Android 8.1 via FOTA due to the limitation of memory size. We are trying to find other ways, please just be little patient.

If you have any problem during the update, please contact us via service@unihertz.com. We will offer all the help you need.

We are also working on the open source as many customers asked and will announce it when it is available.

BTW, our new project –Atom World`s Smallest 4G Rugged Smartphone was just successfully founded. Thanks for all the support!

If you miss the chance but still want it, do not worry, the pre-order will be open in our website very soon. Please keep an eye on our website or follow us in Facebook/Twitter to get the latest notice!

Reply

Use props Report

Posted at 2018-7-17 00:26:46 | All floors
rakrouki Posted at 2018-7-16 15:13
reply from tech support:

We guess you met the problem when updating your phone in the March version ...

Downloading the update file for the third time.

To update the March version <308> to Android 8.1 go to

Settings → Storage → SD card → Eject <the SD card>

Download the update:

Settings -> About phone (the last item... scroll to the end) -> Wireless update

<Install> the update

A Mount command becomes available after you Eject the MicroSD card.

Mount the SD card after you have updated to Android 8.1

:-)
Reply Support 2 Opposition 0

Use props Report

Posted at 2018-8-11 18:39:21 | All floors
Just tried the new update and worked first time. None of the glitches from the prior one. Jelly Pro feels a lot faster and smoother than it did before.
Reply Support 1 Opposition 0

Use props Report

Posted at 2018-7-28 23:03:40 | All floors
Mach Posted at 2018-7-28 19:18
I have tried to update to the last version 8.1. However when I follow the instructions, through WIFI ...

Why you don't read the thread, Mach?
The answer is just 3 posts above yours!
Reply Support 1 Opposition 0

Use props Report

Posted at 2018-7-17 18:28:23 | All floors
StormChild Posted at 2018-7-17 09:23
I also had to do a factory reset, but I wasn't annoyed, because it's only my secondary phone.
So  ...

I've also no GPS fix!
It can see some satellites but isn't able to fix them.
Even not after I've cleared and updated AGPS.
Reply Support 1 Opposition 0

Use props Report

Posted at 2018-7-17 11:49:04 | All floors
Pls email Unihertz for help, they will help you.
Reply Support 1 Opposition 0

Use props Report

Posted at 2018-7-13 12:58:35 | All floors
Last edited by rtenggario In 2018-7-13 13:00 Editor

Tried few time, still no luck
Jelly PRO, SG region
Any link for me to download and update offline?
Reply Support Opposition

Use props Report

Posted at 2018-7-13 14:20:13 | All floors
rtenggario Posted at 2018-7-13 12:58
Tried few time, still no luck
Jelly PRO, SG region
Any link for me to download and update offline?

You can email IMEI to Unihertz customer service so that you can update it ASAP.
Reply Support Opposition

Use props Report

Posted at 2018-7-13 15:02:08 | All floors
xiexiaodong Posted at 2018-7-13 14:20
You can email IMEI to Unihertz customer service so that you can update it ASAP.

they not respond to email.
is their support good?

Reply Support Opposition

Use props Report

Posted at 2018-7-13 15:42:05 | All floors
Thanks, I tried and succeeded
Reply Support Opposition

Use props Report

Posted at 2018-7-13 16:09:48 | All floors
hello
the update it's possible for France?
Because it tells me no update available
Reply Support Opposition

Use props Report

Posted at 2018-7-13 16:23:45 | All floors
Hi,
I'm also on EU network (Denmark), but no success.
Any news on when the update is available?
Currently i have version Unihertz_Jelly-Pro_20180308_20180308-1153.
Reply Support Opposition

Use props Report

Posted at 2018-7-13 16:46:48 | All floors
rtenggario Posted at 2018-7-13 15:02
they not respond to email.
is their support good?

Yes, they always response emails very quickly.
Reply Support Opposition

Use props Report

Posted at 2018-7-14 13:59:14 | All floors
I finally saw the update on my Jelly pro (in Sweden) and started it! Now the screen is stuck on the installing system update with intermittent flickering where the first dot (the red one) moves a couple of pixels and then freezes only to repeat this over and over again! Suggestions?
Reply Support Opposition

Use props Report

Posted at 2018-7-15 02:18:31 | All floors
Downloaded and rebooted fine but then blank screen with 'Error!' in the middle of it. Sits there for about a minute before rebooting and reverting to the old firmware. Are there any tips for getting this to work or a link to download the firmware as with the last version that caused issues?
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Quick Reply Back to top Back to list