Unihertz Titan Slim Type-C_FPC Replacement Tutorial - Unihertz

Unihertz Titan Slim Type-C_FPC Replacement Tutorial

This tutorial will go through the process of replacing the Type-C_FPC assembly of Unihertz Titan Slim smartphone.

Unihertz Titan Slim Type-C_FPC Replacement Tutorial

This tutorial will go through the process of replacing the Type-C_FPC assembly of Unihertz Titan Slim smartphone.

It is important that you read the entire guide and make sure you can complete all the steps before you start to replace the Type-C_FPC assembly of your Unihertz Titan Slim smartphone. Otherwise, finding a local trained repair specialist to conduct the repair is recommended.

How to Replace the Type-C_FPC Assembly for Unihertz Titan Slim

How to Replace the Type-C_FPC Assembly for Unihertz Titan Slim Step by Step

Titan Slim Type-C_FPC Assembly Replacement Step 01

Step 1

Put the back shell of the mobile phone on the heating platform to heat You can also use a heat gun to heat along the edge of the rear shell
Titan Slim Type-C_FPC Assembly Replacement Step 02

Step 2

Wait until the double-sided tape on the back cover is softened, use a suction cup tool and a crowbar to pry off the back cover (be careful not to damage the glass on the back cover)
Titan Slim Type-C_FPC Assembly Replacement Step 03

Step 3

Remove the back shell
Titan Slim Type-C_FPC Assembly Replacement Step 04

Step 4

Remove 11 screws
Titan Slim Type-C_FPC Assembly Replacement Step 05

Step 5

Remove the WIFI/BT antenna bracket, NFC antenna bracket, and main antenna bracket
Titan Slim Type-C_FPC Assembly Replacement Step 06

Step 6

Pry open the cable interface on the antenna board Remove the antenna board
Titan Slim Type-C_FPC Assembly Replacement Step 07

Step 7

Pry open the cable interface on type-c_FPC Remove type-c_FPC
Titan Slim Type-C_FPC Assembly Replacement Step 08

Step 8

Install the rubber ring on the old type-c_FPC to the new type-c_FPC
Titan Slim Type-C_FPC Assembly Replacement Step 09

Step 9

Install type-c_FPC Connect the cable interface on type-c_FPC
Titan Slim Type-C_FPC Assembly Replacement Step 10

Step 10

Install the antenna board Connect the cable interface on the antenna board
Titan Slim Type-C_FPC Assembly Replacement Step 11

Step 11

Install the main antenna bracket, NFC antenna bracket, WIFI/BT antenna bracket
Titan Slim Type-C_FPC Assembly Replacement Step 12

Step 12

Install 11 screws
Titan Slim Type-C_FPC Assembly Replacement Step 13

Step 13

Install the rear case