Unihertz Titan Camera Replacement Tutorial

This tutorial will go through the process of replacing the camera of Unihertz Titan smartphone.

It is important that you read the entire guide and make sure you can complete all the steps before you start to replace the screen of your Unihertz Titan smartphone. Otherwise, finding a local trained repair specialist to conduct the repair is recommended.

How to Replace the Camera for Unihertz Titan

How to Replace the Camera for Unihertz Titan Step by Step

	Step 1 Remove the three screws from the right edge bezel, remove the right edge bezel (Be careful not to drop the buttons)
	Step 2 Remove the three screws from the left edge bezel, remove the SIM card tray, and remove the left edge bezel (Be careful not to drop the buttons)
	Step 3 Remove the four screws that fix the rear panel
	Step 4 Remove the six screws on the right side of the device body
	Step 5 Remove the six screws on the left side of the device body
	Step 6 Remove the rear panel gently
	Step 7 Remove the seven screws from the antenna module
	Step 8 Remove the antenna module gently
	Step 9 Pry open the 7 cable ports connected to the motherboard
	Step 10 Remove the two screws on the motherboard If you accidentally rip off the strips, use tweezers to gently rotate to pull out the remaining strips.
	Step 11 Remove the motherboard (be careful with the cables on the right side of the motherboard)
	Step 12 Remove the front camera
	Step 13 Remove the rear camera
	Step 14 Install a new front-facing camera
	Step 15 Install a new rear camera
	Step 16 Install the motherboard Remove the protective film from the new camera
	Step 17 Connect the 4 cable ports on the motherboard
	Step 18 Install the 2 screws on the motherboard
	Step 19 Connect the 3 cable ports on the motherboard
	Step 20 Install the diversity antenna bracket and 7 screws
	Step 21 Install the back shell
	Step 22 Install the 12 screws on both sides of the fuselage
	Step 23 Install side strips and 6 screws Install the SIM card tray