Unihertz Atom L/XL Speaker Assembly Replacement Tutorial - Unihertz

Unihertz Atom L/XL Speaker Assembly Replacement Tutorial

This tutorial will go through the process of replacing the speaker assembly of Unihertz Atom L/XL smartphone.
Unihertz Atom XL Battery Replacement Tutorial Reading Unihertz Atom L/XL Speaker Assembly Replacement Tutorial 2 minutes Next Unihertz Jelly 2 Screen Replacement Tutorial
Unihertz Atom L/XL Speaker Assembly Replacement Tutorial

This tutorial will go through the process of replacing the speaker assembly of Unihertz Atom L/XL smartphone.

It is important that you read the entire guide and make sure you can complete all the steps before you start to replace the speaker assembly of your Unihertz Atom L/XL smartphone. Otherwise, finding a local trained repair specialist to conduct the repair is recommended.

How to Replace the Speaker Assembly for Unihertz Atom L/XL

How to Replace the Speaker Assembly for Unihertz Atom L/XL Step by Step

Atom XL Loudspeaker Assembly Replacement Step 01

Step 1

Remove the 6 screws from the side edge bezel, remove the side edge bezel and take out the SIM card tray gently.
Atom XL Loudspeaker Assembly Replacement Step 02

Step 2

Remove the ten screws from the rear panel.
Atom XL Loudspeaker Assembly Replacement Step 03

Step 3

Remove the rear panel assembly.
Atom XL Loudspeaker Assembly Replacement Step 04

Step 4

Remove the four screws on the speaker assembly (the speaker assembly is located on the rear panel assembly).
Atom XL Loudspeaker Assembly Replacement Step 05

Step 5

Remove the speaker assembly.
Atom XL Loudspeaker Assembly Replacement Step 06

Step 6

Replace the replacement speaker assembly.
Atom XL Loudspeaker Assembly Replacement Step 07

Step 7

Tighten the four screws on the speaker assembly.
Atom XL Loudspeaker Assembly Replacement Step 08

Step 8

Install the rear panel assembly.
Atom XL Loudspeaker Assembly Replacement Step 09

Step 9

Tighten the ten screws on the rear panel assembly.
Atom XL Loudspeaker Assembly Replacement Step 10

Step 10

Install the SIM card tray, install the side edge bezel and tighten the six screws.