Unihertz Atom Touchscreen and LCD Assembly Replacement Tutorial - Unihertz

Unihertz Atom Touchscreen and LCD Assembly Replacement Tutorial

This tutorial will go through the process of replacing the touchscreen and LCD assembly of Unihertz Atom smartphone.

Unihertz Jelly 2 Camera Replacement Tutorial Reading Unihertz Atom Touchscreen and LCD Assembly Replacement Tutorial 3 minutes Next Unihertz Atom L/XL Type-C Interface Replacement Tutorial
Unihertz Atom Touchscreen Module Replacement Tutorial

This tutorial will go through the process of replacing the touchscreen and LCD assembly of Unihertz Atom smartphone.

It is important that you read the entire guide and make sure you can complete all the steps before you start to replace the touchscreen and LCD assembly of your Unihertz Atom smartphone. Otherwise, finding a local trained repair specialist to conduct the repair is recommended.

How to Replace the Touchscreen and LCD Assembly for Unihertz Atom

How to Replace the Touchscreen and LCD Assembly for Unihertz Atom Step by Step

Atom Touchscreen and LCD Assembly Replacement Step 01

Step 1

Remove the 8 screws on the rear case and remove the rear case
Atom Touchscreen and LCD Assembly Replacement Step 02

Step 2

Remove the 2 screws on the horn assembly
Atom Touchscreen and LCD Assembly Replacement Step 03

Step 3

Remove the horn assembly
Atom Touchscreen and LCD Assembly Replacement Step 04

Step 4

Pry open the cable interface connecting the battery and the motherboard remove the battery
Atom Touchscreen and LCD Assembly Replacement Step 05

Step 5

Remove the SIM card tray
Atom Touchscreen and LCD Assembly Replacement Step 06

Step 6

Remove the two screws on the type-c_FPC remove type-c_FPC
Atom Touchscreen and LCD Assembly Replacement Step 07

Step 7

Remove the screws on the camera assembly Pry open the cable interface at the connection between the camera assembly and the motherboard
Atom Touchscreen and LCD Assembly Replacement Step 08

Step 8

Remove the camera assembly
Atom Touchscreen and LCD Assembly Replacement Step 09

Step 9

Remove the 2 screws on the motherboard Pry open the 4 cable connectors on the motherboard
Atom Touchscreen and LCD Assembly Replacement Step 10

Step 10

Remove the motherboard (be careful that there are cables connected to the back of the motherboard) Pry open the cable connector on the back of the motherboard
Atom Touchscreen and LCD Assembly Replacement Step 11

Step 11

Remove the side button FPC
Atom Touchscreen and LCD Assembly Replacement Step 12

Step 12

Take out the new front panel assembly Check whether the sealing rings on the distance sensor and the microphone are intact Remove the camera protection foam
Atom Touchscreen and LCD Assembly Replacement Step 13

Step 13

Connect the cable interface on the back of the motherboard Install the motherboard
Atom Touchscreen and LCD Assembly Replacement Step 14

Step 14

Install side button FPC
Atom Touchscreen and LCD Assembly Replacement Step 15

Step 15

Install the 2 screws on the motherboard Install the 4 cable connectors on the motherboard
Atom Touchscreen and LCD Assembly Replacement Step 16

Step 16

Install the camera assembly
Atom Touchscreen and LCD Assembly Replacement Step 17

Step 17

Connect the cable interface between the camera assembly and the motherboard Install the screws on the camera assembly
Atom Touchscreen and LCD Assembly Replacement Step 18

Step 18

Install the battery Install the battery and the cable interface connected to the motherboard
Atom Touchscreen and LCD Assembly Replacement Step 19

Step 19

Install the horn assembly
Atom Touchscreen and LCD Assembly Replacement Step 20

Step 20

Install the 2 screws on the horn assembly
Atom Touchscreen and LCD Assembly Replacement Step 21

Step 21

Install the back shell
Atom Touchscreen and LCD Assembly Replacement Step 22

Step 22

Install the 8 screws on the rear case
Atom Touchscreen and LCD Assembly Replacement Step 23

Step 23

Install the SIM card tray